 |
||||||||||||||
|
||||||||||||||
|
 |
 |
 |
Walkthrough Page 1 |
|
|---|---|---|
|
||
|
Using the headcap wrench that is provided with the handpiece, remove the headcap by turning it counter-clockwise. |  |
|
||
|
Remove the turbine from the handpiece- if the turbine does not come out with the headcap removal, push the turbine out through the rear. |  |
|
||
|
Inspect the interior of the turbine chamber for cleanliness, O-rings and/or washers. Also inspect the cap for cleanliness and rear O-rings. |  |
|
||
|
Remove any O-rings and/or washers from the turbine chamber and headcap. Turbine chamber and cap can be cleaned with Impact Air 45® lubricant and a bristle-brush. Discard O-rings that are hardened or damaged. Discard washers that are worn. |  |
|
||
|
|
|
Palisades Dental, LLC
111 Cedar Lane
Englewood, New Jersey 07631
1-800-664-8000 1-201-569-0050
Fax 1-201-569-0250
© 2010 Palisades Dental, LLC
Site design by Westchester Creative Group, Inc./Linear Design Group LLC